Updating and Programing Channels on a COM3000

Updating and Programing Channels on a COM3000

In this video, we’ll walk you through the full process of setting up and updating channels on a COM3000 system. You’ll learn how to program the channels, find the correct channel numbers, and assign them using the DIRECTV L&I channel card, as well as how to locate and add local channels.


Warning
When working with a COM3000 rack equipped with Datatronix NTSC-32 modulators, it’s essential to properly parse the modulators for the system to function correctly. Please refer to our separate guide on how to parse NTSC-32s for step-by-step instructions. How to Parse the NTSC-32 COM3000 Transcoder

Use the following resources during setup:

• L&I Channel Lineup: Full DIRECTV rate card and channel guide

• Local Channel Lookup: https://www.directv.com/locals/ (search by ZIP code)

• COM3000 Local Login: NACE GUI Login – accessible on the local network

• IP Configuration Reference: For IP settings of other gateways, distributors, and modulators, please see our guide: Local IP Addresses for TV System Components




    • Related Articles

    • EmpireTV How to Scan Your TV for Channels

      If you’re missing channels or setting up your TV for the first time, scanning your TV for channels is a quick and simple solution. Follow the steps below to complete the process and start watching your favorite shows in no time. 1. Find Your Remote: ...

    • How to Power Cycle Your COM 3000 TV Rack

      Power cycling your COM 300 TV rack is quite simple. Just press the power button at the bottom of the unit—this will turn off all components on the rack, as shown below. Wait 10 seconds, then turn it back on.

    • Sites to Help You with OTA Channels and Installation

      ? Sites to Help You with OTA Channels and Installation Looking to get free Over-the-Air (OTA) TV channels at your location? Here are two great resources that will help you determine what channels you can receive and how to install your antenna for ...

    • COM3000 Common Issues and Troubleshooting

      While the COM3000 system is highly reliable, there are a few common issues that may arise during setup or routine operation. This section outlines known problems along with steps to quickly diagnose and resolve them. 1. Edge QAM not found Issue: ...

    • EmpireTV DIRECTV Dealer Cancelation Contacts

      If you were an existing DIRECTV customer and switched to EmpireTV as your new dealer of record, the process—known as PTR or change of ownership—ensures a smooth transition. During this process, DIRECTV will transfer your account to EmpireTV, which ...