Local IP Addresses for TV System Components

• Related Articles

• EmpireTV TV Completely Down Troubleshooting Checklist

  TV Completely Down Troubleshooting Checklist When all TVs in your facility are completely down (no picture, not even a blurry image), follow this troubleshooting guide: 1. Check for Nonpayment • A very common reason for a complete TV outage is ...

• Updating and Programing Channels on a COM3000

  In this video, we’ll walk you through the full process of setting up and updating channels on a COM3000 system. You’ll learn how to program the channels, find the correct channel numbers, and assign them using the DIRECTV L&I channel card, as well as ...

• How to Power Cycle Your COM 3000 TV Rack

  Power cycling your COM 300 TV rack is quite simple. Just press the power button at the bottom of the unit—this will turn off all components on the rack, as shown below. Wait 10 seconds, then turn it back on.

• One TV Has Bad Picture? Here’s How to Fix It

  Troubleshooting Guide for When Only One TV Has Poor or No Signal If you’re seeing bad picture quality or no signal on just one TV—while the rest are working fine—this is usually a local issue at that specific outlet. It could be a loose connection, a ...

• Understanding Why TV Providers Can Increase Rates Mid-Contract

  At EmpireTV, we strive to provide our customers with transparent and reliable television services. However, some customers may wonder why their TV service costs can increase even while they are still under contract. The answer lies in the way TV ...